IBM CATE C4040-109

可以保證你100%通過IBM認證C4040-109考試

我們承諾，所有購買我們TestPDF提供的 IBM C4040-109題庫，是市場上最新的高通過率的，你只需要記住所有的考試答案，通過考試是很容易的，如果沒有通過考試我們還會全額退款。

購買後，立即下載

付款成功後, 我們的體統將自動通過電子郵箱將你已購買的C4040-109題库(Virtualization Technical Support for AIX and Linux - v2)發送到你的郵箱。（如果在12小時內未收到，請聯繫我們，注意：不要忘記檢查你的垃圾郵件。）

1、不需要大量的時間金錢，僅需20-30個小時，自學成才，輕鬆通過IBM C4040-109考試。
2、IBM C4040-109的考試軟體是類似實際考題研究出來的測試軟體。
3、根據IBM C4040-109的考試科目不斷的變化，採取不斷的更新，會提供最新的考試內容。
4、在互聯網上提供24小時客戶服務。
5、根據過去的題庫問題及答案，TestPDF提供的IBM C4040-109考試題庫和真實的考試有緊密的相似性。
6、通過了IBM認證C4040-109考試在工作上會有很大的晉升機會，使用了TestPDF提供的測試軟體，你會成功的更快。
7、IBM C4040-109認證是個證明自已潛力的認證，通過認證了的往往比沒有通過認證的同行工資高很多。

提供一年的免費更新服務

現在購買我們的產品，我們將會為你提供一年的免費升級服務，保證你順利通過認證考試。如果有任何更新版本，在一年內你可以無限次數的下載我們的產品。

消費保證

TestPDF為IBM認證C4040-109考試提供的測試軟件是很有效的，我們可以保證我們TestPDF提供的題庫是覆蓋面很廣，品質很高的理想考試題庫。你可以先在網站上下載TestPDF提供的部分關於IBM認證C4040-109考試的題庫電子檔(PDF)試用，TestPDF提供的C4040-109題庫都是為了參加IBM認證考試所有人員精心研究的，使用我們的題庫，不用花費大量的金錢和時間考試是可以100%過關的，如果失敗，將100%全額退款。

TestPDF 的 IBM C4040-109題庫是由頂級IT專家團隊以最高技術水平整理製作的，確保了試題的準確性和專業性。這些IT團隊成員都是來自指定認證專家、培訓師和 IBM 相關工作從業者，他們對 C4040-109考試內容和 CATE 認證要求的資歷瞭如指掌，這樣可以確保 C4040-109題庫的高質量。

我們都清楚地知道，IT行業的一個主要問題就是缺乏高質量的學習材料。我們的 C4040-109考試準備材料可以滿足您參加認證考試的一切知識與技巧需求。與實際的認證考試類似，我們的 IBM C4040-109題庫將為您提供有效的考試問題和答案，藉此了解實際的考試內容。這些問題和答案也會幫助您積累 C4040-109實際測試的經驗，熟悉感會消除臨場緊張情緒，讓您發揮出最佳水平。高品質高價值的 C4040-109題庫100%保證通過 CATE C4040-109考試並獲得 CATE 認證。

IBM C4040-109 考試大綱主題:

最新的 CATE C4040-109 免費考試真題：

1. A VIO server requires redundancy on its Shared Ethernet Adapter (SEA). The SEA is backed by physical adapter ent0 and virtual adapter ent2, ent0 and ent1 are the interfaces on a dual-port Ethernet adapter.
What network redundancy technique should be suggested?

A) Create a new SEA using another virtual Ethernet adapter on the VIO Server and assign ent1 as the backing device. Assign this SEA to the clients and setup Link Aggregation on the clients.
B) ent1 should be used to set up a Network Interface Backup through 'smitty etherchannel1. The new Etherchannel adapter should be used as the backing device for the SEA
C) ent1 should be used to set up Link Aggregation through 'smitty linkagg1. The new Link Aggregation adapter should be used as the backing device for the SEA
D) Setup the SEA failover control channel to use the ent1 physical adapter as the backup control channel.

2. An administrator wants to add vSCSI adapters to a new client using the existing mapping schema. The slots will be 40/41 on the VIO Server. Given the current properties of the VIO server, what must be done to accomplish this?

A) Change the Maximum virtual adapters to 50 in the VIOS partition profile.
Create the vSCSI adapters on slots 40/41 in the VIOS partition profile and map them as
"Any client partition can connect".
Reboot the VIOS.
B) Use DLPAR to increase the Maximum virtual adapters to 50.
Use DLPAR to create the vSCSI adapters on slots 40/41 and map them as "Any client
partition can connect".
C) Use DLPAR to increase the Maximum virtual adapters to 50.
Use DLPAR to create the vSCSI adapters on slots 40/41 and map them to the new client.
D) Change the Maximum virtual adapters to 50 in the VIOS partition profile.
Create the vSCSI adapters on slots 40/41 in the VIOS partition profile and map them to the
new client.
Shutdown and reactivate the VIOS.

3. The administrator of a Power 740 is attempting to define an IVE port as promiscuous for a new VIO server. All LPARs using the IVE port have been shut down, but the administrator still receives a message stating that the VIO server cannot be designated as the promiscuous LPAR. What steps can be performed to enable the IVE port as promiscuous for the VIO server?

A) Power off the Managed System and reactivate it.
B) Set the promiscuous setting to "none" and save the setting before attempting the operation again.
C) Change the MCS value from 16 to a lower value.
D) Remove the IVE configuration from the existing LPARs and reactivate them.

4. During the migration of a partition that uses Active Memory Sharing (AMS) the following error is received:
HSCLA304: A suitable shared memory pool for the mobile partitions was not found on the destination managed system...
Which of the following is the most probable cause?

A) The available paging devices on the destination are all marked as redundant capable.
B) The source and destination servers have different Logical Memory Block sizes.
C) The shared memory pool on the destination is larger than that specified on the source.
D) The source is using redundant VIO server paging partitions and the destination has only one paging VIO server partition in the shared memory pool.

5. After applying the latest Fix Pack to a VIO server, the administrator finds an issue with the hosted media repository. The lsrep command fails with the following error:
"Unable to retrieve repository date due to incomplete repository structure"
What is the most likely cause for this error?

A) The repository was in a loaded state prior to applying the Fix Pack.
B) The VIO server has not been rebooted since applying the Fix Pack.
C) The reboot caused the repository to forcibly unmount.
D) The Fix Pack reset the date and time to the shipped default.

問題與答案：